 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MK14 Series Cylindrical Reed Sensors MEDER electronic DESCRIPTION MK14 sensors are magnetically operated Reed proximity switches in a 4.0 mm diameter miniature module, fitted with interconnect cable. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch. APPLICATIONS * Position and limit switch Pneumatic or hydraulic actuator position * End motion detection for linear drive Indication and end travel limit switch * Limit and motion detection for machine industry FEATURES * High power switches available * Other cables, connectors and colors available * Various case sizes available * Five operate sensitivities available * A choice of cable terminations and lengths are available All dimensions in mm [inches] DIMENSIONS www.meder.com 238 MEDER electronic MK14 Series Cylindrical Reed Sensors ORDER INFORMATION Series MK14 Contact Form XX Switch Model XX 66 1 Form A Options 1 Form B 1 Form C 84 C, D, E 90 200 * W Magnetic Sensitivity XB, C, D, E Cable length (mm) XXX Part Number Example Termination X MK14 - 1A66 C - 200 W 1A is the contact form 66 is the switch model C is the magnetic sensitivity 200 is the cable length (mm) W is the termination * Other cable lengths available MAGNETIC SENSITIVITY Sensitivity Class Pull-in At Range B C D E 10 - 15 15 - 20 20 - 25 25 - 30 TERMINATION For wire and termination details please consult factory. Form C version requires 3 conductors. W The cable cut length includes: 5 mm of wire stripped and tinned www.meder.com 239 MK14 Series Cylindrical Reed Sensors MEDER electronic CONTACT DATA All Data at 20 C Contact Ratings Switching Power Switching Voltage Switching Current Carry Current Static Contact Resistance Dynamic Contact Resistance Insulation Resistance across Contacts Breakdown Voltage across Contact Operation Time incl. Bounce Release Time Capacitance Contact Operation ** Must Operate Condition Must Release Condition Environmental Data Shock Resistance Vibration Resistance Ambient Temperature Stock Temperature Soldering Temperature 1/2 sinus wave duration 11 ms From 10 - 2000 Hz 10C/ minute max. allowable 10C/ minute max. allowable 5 sec. dwell -20 -35 50 20 85 85 260 -20 -35 50 20 85 85 260 g g o Switch Model Contact Form Conditions Any DC combination of V & A not to exceed their individual max.`s DC or peak AC DC or peak AC DC or peak AC w/ 0.5 V & 10 mA Measured w/ 0.5 V & 50 mA , 1.5 ms after closure 100 volts applied Voltage applied for 60 sec. min. Measured w/ 100 % overdrive Measured w/ no coil suppression at 10 kHz cross contact Switch 66 Form A Min. Typ. Max. 10 200 0.5 1.25 150 200 1010 * 225 * Switch 84 Form A Min. Typ. Max. Units 10 400 0.5 1.0 150 200 1011 700 W V A A m m VDC 0.5 0.1 0.2 0.7 2.0 0.1 ms ms pF Steady state field Steady state field 10 4 30 27 15 6 30 27 AT AT C C C o o Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * Insulation resistance of 1012 and breakdown voltage of 480 VDC is available. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required. www.meder.com 240 MEDER electronic MK14 Series Cylindrical Reed Sensors CONTACT DATA All Data at 20 C Contact Ratings Switching Power Switching Voltage Switching Current Carry Current Static Contact Resistance Dynamic Contact Resistance Insulation Resistance across Contacts Breakdown Voltage across Contact Operation Time incl. Bounce Release Time Capacitance Contact Operation ** Must Operate Condition Must Release Condition Environmental Data Shock Resistance Vibration Resistance Ambient Temperature Stock Temperature Soldering Temperature 1/2 sinus wave duration 11 ms From 10 - 2000 Hz 10C/ minute max. allowable 10C/ minute max. allowable 5 sec. dwell -20 -35 50 20 85 85 260 g g o Switch Model Contact Form Conditions Any DC combination of V & A not to exceed their individual max.`s DC or peak AC DC or peak AC DC or peak AC w/ 0.5 V & 10 mA Measured w/ 0.5 V & 50 mA , 1.5 ms after closure 100 volts applied Voltage applied for 60 sec. min. Measured w/ 100 % overdrive Measured w/ no coil suppression at 10 kHz cross contact Switch 90 Form B / C Min. Typ. Max. Units 3 175 0.25 1.2 150 250 109 200 W V A A m m VDC 0.7 1.5 1.0 ms ms pF Steady state field Steady state field 10 4 35 30 AT AT C C C o o Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required. www.meder.com 241 |
Price & Availability of MK14-1A84C-200W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |